Custom furniture cost in Bangalore in 2026: prices for sofas, beds, dining tables & more

Short answer: A custom-made piece from a Bengaluru workshop in 2026 typically runs 1.4× to 2.2× the price of a comparable showroom piece from the mid-market brands, and 0.5× to 0.75× the price of imported branded furniture from Natuzzi / Minotti / Poltrona Frau. A bench-made 3-seater sofa sits between ₹85,000 and ₹2,25,000 depending on frame timber, upholstery and complexity. A custom king-size bed with upholstered headboard and storage runs ₹95,000 to ₹2,00,000. A 6-seater dining table in solid teak or walnut starts at ₹75,000 and climbs past ₹2,50,000 for signature marble-top configurations. The ranges below are what we actually quote in the Cheemasandra workshop — not aspirational list prices, not strip-mall estimates.

How much does custom furniture cost in Bangalore in 2026?

The honest answer is: it depends on four things — material tier, maker tier, piece complexity, and finish quality. Keep those four straight and the price range stops feeling arbitrary. We'll break each down later; here's the top-line math first.

For a 2026 Bengaluru household commissioning one piece at a time — not a full house, just one sofa or one dining table — budget three brackets:

• Entry custom (₹35,000 – ₹85,000 per piece): solid wood frame in local sheesham or mango, hand-loom cotton or art-leather upholstery, standard brass or chrome hardware, satin polish. Honest workmanship, 10-year lifespan if cared for.
• Mid-market custom (₹85,000 – ₹2,25,000 per piece): French beech or Burmese teak frames, linen-cotton blends or top-grain leather, soft-close hinges, hand-rubbed polish, 20-year lifespan.
• Signature custom (₹2,25,000 – ₹8,00,000+ per piece): imported European beech, mulberry silk or imported Italian leather, aged brass hardware, French-polish or lacquer finishes, bespoke dimensions. The pieces our clients leave to their grandchildren.

A 3-BHK Bengaluru apartment commissioning five to seven anchor pieces at mid-market spec typically lands between ₹8 lakh and ₹18 lakh for furniture alone — before furnishing, lighting, or built-ins. A full custom villa fit-out runs ₹35 lakh to ₹1.2 crore depending on the piece count and tier. We cover the per-sq-ft maths in the 2026 interior design cost guide, and the per-piece breakdown is in the next section.

Price comparison table: sofas, dining tables, beds, TV units, coffee tables and wardrobes

The numbers below are our live quote bands in October 2026 for a standard dimension in each piece type. Everything bench-made in our Cheemasandra workshop, delivered anywhere in Bengaluru. Prices exclude GST (18%) and transport (₹1,500 – ₹8,000 depending on piece + distance).

A single entry marked “—” means we don't recommend that tier at that piece size — a sub-entry walk-in wardrobe or a sub-entry 8-seater marble dining table is a false economy that fails within three years. Better to drop a tier on the piece size than to drop a tier on the finish.

What affects pricing? Wood, plywood, upholstery, hardware, finishes and labour

The ₹55,000 sofa and the ₹2,25,000 sofa use the same category of components. What changes between them is the tier of each component. Here's how each line item moves the final number.

Timber and plywood

For frames and carcass work, our tier bands are:

• Entry: BWR-grade 18mm plywood for carcass, local sheesham or mango wood for solid-wood parts (₹180–₹260 per sq ft of material cost)
• Mid-market: Marine-grade plywood or MDF-faced ply, Burmese teak or French beech for solid-wood parts (₹340–₹520 per sq ft)
• Signature: Imported European beech, American walnut, Italian walnut-faced plywood (₹620–₹1,100 per sq ft)

The jump from entry to mid-market timber adds roughly ₹8,000–₹18,000 to a sofa price. The jump from mid-market to signature adds another ₹22,000–₹60,000. The reason the premium is worth it: good hardwood holds joinery under Bengaluru's humidity for decades, while cheaper plywood swells and loosens at the joints within five to eight years. Our materials-that-age-well guide covers this in depth.

Upholstery

On a sofa, upholstery is the second-biggest line item after frame. Fabric and leather prices in Bengaluru in 2026:

• Hand-loom cotton: ₹500–₹1,200 per metre; breathable; good value for family rooms with daily use
• Linen & linen-cotton blend: ₹900–₹2,200 per metre; the mid-market default; ages softly
• Art-leather (bonded + PU): ₹6,000–₹15,000 per metre; wipes clean, 7–10 year lifespan
• Top-grain leather: ₹18,000–₹40,000 per metre; the long-life choice; develops patina beautifully
• Imported Italian leather: ₹45,000–₹1,20,000 per metre; signature tier only

A 3-seater sofa uses roughly 7–9 metres of fabric or 5–6 metres of leather (leather is wider, less waste). So moving from a ₹900/m linen to a ₹25,000/m top-grain leather adds roughly ₹1,20,000 to the sofa — which is why upholstery alone can double a sofa's price.

Hardware

Hinges, drawer runners, handles, locks, brackets. Easy to under-spec; expensive to retrofit when the drawer stops closing properly in year three.

• Entry: standard brass-plated steel hinges, basic ball-bearing runners (₹150–₹400 per unit)
• Mid-market: Hettich or Hafele soft-close hinges, Blum-equivalent full-extension runners (₹500–₹1,100 per unit)
• Signature: Blum Tandembox, aged brass pulls, specified touch-latch mechanisms (₹1,400–₹4,000 per unit)

Across a 4-door wardrobe with 6 internal drawers you're looking at 20+ hardware points — the entry-to-mid-market upgrade is roughly ₹14,000; mid to signature adds another ₹28,000. It's an unglamorous spend that pays back every time a drawer closes without protest.

Finishes

The visible surface quality. In increasing order of cost + lifespan: PU paint < lacquer < polyurethane finish < hand-rubbed polish < French polish. Signature-tier pieces get hand-rubbed or French-polished finishes that develop a satin glow over a decade — spray-paint finishes stay flat and dull from day one.

Labour

This is the invisible line item that separates workshops from factories. In our Cheemasandra workshop, a 3-seater sofa consumes roughly 90–140 hours of skilled labour across frame carpentry, upholstery, polish, QC. A factory-made sofa with CNC-cut parts and machine-glued joinery is 15–25 hours. The difference shows in the piece — hand-cut joinery sits tighter and lasts longer — but it's also roughly ₹22,000–₹45,000 of the final price difference between a workshop-made and a factory-made sofa at the same visible spec.

Custom furniture costs for 2BHK, 3BHK and villas

When clients ask what to budget for an entire home's custom furniture — not one piece at a time — the per-piece table doesn't give a clean answer. The per-home brackets below assume you're commissioning the anchor pieces custom (sofa, bed, dining, TV unit, wardrobes) and buying smaller items off-the-shelf. Full built-in work, lighting, and furnishing (drapes, rugs, cushions) sit on top of these numbers.

2BHK (900–1,200 sq ft) — anchor custom furniture

Living: 1 sofa + 1 accent chair + 1 coffee table + 1 TV unit. Dining: 4-seater table + chairs. Bedrooms: 2 beds + 2 wardrobes.

• Entry custom: ₹4.5 L – ₹7.5 L
• Mid-market custom: ₹8 L – ₹14 L
• Signature custom: ₹16 L – ₹30 L+

3BHK (1,400–1,900 sq ft) — anchor custom furniture

Add a second living / family room sofa, a 6-seater dining upgrade, a third bedroom bed + wardrobe, often a study desk + chair.

• Entry custom: ₹7 L – ₹12 L
• Mid-market custom: ₹13 L – ₹22 L
• Signature custom: ₹25 L – ₹55 L+

Villa (3,500–7,000 sq ft) — anchor custom furniture

Multiple living zones, a formal dining + a family breakfast counter, 4–5 bedrooms with upgraded masters, often a home theatre, study, bar, outdoor/semi-outdoor furniture. The piece count typically doubles over a 3BHK.

• Mid-market custom: ₹25 L – ₹45 L
• Signature custom: ₹50 L – ₹1.4 Cr

The 2BHK / 3BHK / villa split matters because the per-sq-ft cost of custom furniture is roughly the same across sizes — the total scales almost linearly with floor area. Where villas diverge is in the piece types that only make sense at villa scale (home theatre seating, outdoor dining, bar joinery) — none of which are needed in an apartment.

Custom-made versus showroom furniture: cost differences

The cleanest way to think about it: showroom furniture optimises for shelf price, custom furniture optimises for fit + lifespan. The gap in list price is real; the gap in cost-per-year-of-use is usually smaller than people expect.

The practical read: showroom and mid-market custom land at roughly the same cost-per-year of use, because the showroom sofa gets replaced sooner. Custom wins on fit (built for your specific room + brief) and material transparency (you pick the exact timber + fabric). Showroom wins on speed. Imported branded wins on brand status; the lifespan premium is marginal.

How to compare furniture quotations and avoid hidden charges

Three studios will quote the same brief at prices that look wildly different. Nine times out of ten the gap comes down to what's being left off the quotation. Here's the checklist we recommend clients work through before signing anywhere.

• Timber species named — a quote saying “solid wood” means nothing. Sheesham, teak, beech, oak, walnut are five different price points and five different lifespans. Ask for species on every line item.
• Plywood grade specified — commercial, BWR, BWP, and marine plywood are not interchangeable. Marine ply costs 1.8× BWR and is worth it for wardrobes exposed to Bengaluru humidity.
• Fabric or leather code — a reputable quote lists the swatch code and metres consumed. “Premium fabric” isn't a specification.
• Hardware brand — Hettich, Hafele, Blum, or generic? The generic hinge that looks identical in year 1 is a drawer that doesn't close in year 3.
• Finish type — PU paint, melamine, lacquer, hand-rubbed polish, French polish are different jobs at different prices.
• Transport, loading, and unloading — often quoted “extra”. Ask for the number upfront; it typically runs ₹1,500–₹8,000 per piece depending on distance and floor.
• Installation — some wardrobes and TV units arrive flat-packed. Installation can add ₹3,000–₹12,000 if not included.
• GST — 18% on furniture. Make sure the quote states ex-GST or inclusive. A quote comparison without this correction can be 18% misleading.
• Warranty — ask for it in writing. Our standard is 12 months on workmanship, 5 years on frame joinery. Workshops that won't write that down are the ones you walk away from.
• Payment schedule — a reasonable split is 50% advance / 30% on delivery / 20% after installation. A workshop asking 100% upfront or 90% advance is a flag.

If a quote comes in 30% below the competition, don't assume you've found a bargain — assume one of the above has been dropped from the spec. Nine times out of ten, that's exactly what happened.

Frequently asked questions

How long does custom furniture take to build in Bangalore?

A single piece of mid-market spec takes 4 to 8 weeks from signed order to delivery: 1 week for material procurement, 2–4 weeks on the workshop floor, 1 week for polish + QC, 3–5 days for packing + transport. Signature pieces run 8 to 14 weeks because of specialty imports (fabrics, leathers, hardware). Full-home orders — multiple pieces running in parallel — ship in 10 to 16 weeks because we stagger the workshop load.

What materials are best for Bengaluru's climate?

French beech, Burmese teak, and solid walnut hold up best in Bengaluru's humidity if kiln-dried properly. For upholstery, natural fibres (linen, hand-loom cotton, art-leather, top-grain leather) outperform synthetics because they breathe through the monsoon. For hardware, aged brass develops a lovely patina over 5 years; chrome tarnishes at the joints by year 2. Our materials guide covers the full logic.

Do custom pieces come with a warranty?

Reputable Bengaluru workshops offer 12 to 24 months on workmanship (upholstery, polish, hardware) and 5 to 10 years on frame joinery. Flamingo's standard is 12 months on workmanship and 5 years on frame joinery, with an optional 10-year AMC that bundles annual polish refresh + hardware tune-up. Ask for the warranty terms in writing before signing — verbal warranties in this trade are not worth much.

Can I visit the workshop before ordering?

You should, and any good Bengaluru studio will encourage it. Our Cheemasandra workshop runs tours by appointment — you can see raw timber, in-progress joinery, the polish line, and a sample library of fabrics and leathers. A workshop visit tells you more about a studio's standards in 20 minutes than three pages of marketing can. If a studio won't let you visit the workshop, that's a signal in itself.

What about delivery and installation?

Delivery to any pin code in Bengaluru runs ₹1,500 to ₹8,000 per piece depending on size and floor access. Installation is included for most Flamingo pieces (wardrobes, TV units, beds) but priced separately for bespoke built-ins. For deliveries outside Bengaluru, we quote on a per-city basis — a sofa to Chennai or Hyderabad typically adds ₹6,000–₹14,000, Mumbai or Delhi ₹18,000–₹32,000. International shipping is quoted case by case via our Atelier Network export program.

Is custom furniture worth the cost over branded alternatives?

It depends on the horizon. For pieces you plan to live with for 15+ years — a sofa, a dining table, a bed — mid-market custom pencils out at roughly the same cost per year of use as showroom branded, with better fit and much better repairability. For transient pieces (a bachelor-pad sofa, a child's bedroom set that will be refreshed in 4 years), showroom is the honest answer. For statement pieces where you want unique dimensions, imported materials, or exact matching to an interior palette — custom is the only serious option. The decision isn't custom-vs-branded in the abstract; it's piece-by-piece based on expected lifespan.

How do I budget for custom furniture if I'm doing a staged refurbishment?

Prioritise anchor pieces in year 1 (sofa + dining table + master bed), add bedroom wardrobes + TV unit in year 2, add accent pieces (chairs, coffee tables, console) in year 3. This phased approach lets you spread ₹12–15 lakh of custom furniture over 36 months at ₹35,000–₹45,000 per month, which is more manageable than a single large outlay — and gives you time to live with each piece before committing to the next.

Ready to commission?

Planning custom furniture for your Bangalore home? Share your requirements and we'll come back within two working days with a line-item estimate that follows the specification checklist above — no “premium fabric” hand-waving, no undisclosed transport line, no missing warranty. Start with the estimate form, browse the signature collection for direction, or visit the Cheemasandra workshop by appointment via the contact page. For context on how pricing fits into a full interior budget, see our 2026 interior design cost guide and the workshop-backed studio guide.